Skip to main content
Need help choosing the right robotics product? Call iBuyRobotics: (855) I-BUY-ROBO | (855) 428-9762
Makerbase

Makerbase Vesc 75200 V2 84V 200A High Current With Alu PCB Based on Vesc For E-Foil Fight Robot Surfboard AGV Robot

WARNING: Do not connect or disconnect interface devices (USB, encoder, etc.) or power-related components (motor, power supply, etc.) while the system is powered on, as this may cause electrical surges or short circuits, damaging the motherboard.Note: For enhanced heat dissipation, a generous application of thermal grease was used during assembly. You may notice some thermal grease around the housing seams. This is normal and will not impact the product's performance or safety. Please use th

$123.99
In Stock
Secure checkout
Fast shipping
30-day returns

Need help before you buy?

Call iBuyRobotics for product guidance, compatibility questions, bulk orders, or support.

(855) I-BUY-ROBO (855) 428-9762

WARNING:
Do not connect or disconnect interface devices (USB, encoder, etc.) or power-related components (motor, power supply, etc.) while the system is powered on, as this may cause electrical surges or short circuits, damaging the motherboard.

Note:
For enhanced heat dissipation, a generous application of thermal grease was used during assembly. You may notice some thermal grease around the housing seams. This is normal and will not impact the product's performance or safety. Please use the product with confidence..



Warm tips:

1. Users who purchased before November 15, 2023 will receive the old version of MKSESC 75200 V2, which is not applicable to phase filtering (Motor Settings -> FOC -> Filter). When using the factory firmware model 75200 R2, please turn off the phase filtering function (Enable Phase Filters -> False). It is recommended to use the firmware model MKSESC_75200_V2_OLD for subsequent use.


2. Users who purchase after November 15, 2023 will receive the new version MKSESC 75200 V2, which supports phase filtering. The factory firmware version is V6.02, and the firmware model is MKSESC_75200_V2.