Touch Motion Sensor Switch Hand Sweep Wave On-Off 12V-24V IR Movement Sensing for Closet Cabinet Light Wardrobe Door Drawer Lamp
Click/Tap below photo for 3/6 way splitter and 2 meter cable:Click/Tap below photo for Double Sensor Door Switch:Four Types of Switch for you to choose from(1) Hand-waving sensor switch:Input/Output: DC12-24V Watts:40W(12V),80W(24V) Working distance: 20-80mmActivated by hands waving (actually, you can wave a book or other items). When you wave your hand at the sensor it will turn on automatically.When you wave your hand again it will turn off. When you keep your hand still in front of it for
- High-precision sensing output for advanced robotic control
- Dual-voltage logic compatibility supporting 3.3V and 5.0V inputs
- Integrates easily with standard I2C and SPI serial interfaces
- Ultra-compact form factor suitable for miniature space setups
- Factory-calibrated for immediate out-of-the-box prototyping
- Low power consumption ideal for battery-operated smart devices
- Robust electromagnetic interference (EMI) shield shielding
Need help before you buy?
Call iBuyRobotics for product guidance, compatibility questions, bulk orders, or support.
(855) I-BUY-ROBO (855) 428-9762Click/Tap below photo for 3/6 way splitter and 2 meter cable:
Click/Tap below photo for Double Sensor Door Switch:
Four Types of Switch for you to choose from
(1) Hand-waving sensor switch:
Input/Output: DC12-24V Watts:40W(12V),80W(24V) Working distance: 20-80mm
Activated by hands waving (actually, you can wave a book or other items). When you wave your hand at the sensor it will turn on automatically.
When you wave your hand again it will turn off. When you keep your hand still in front of it for more than 3 seconds, it works as a dimmer.
(2) Touch switch:
Input/Output: DC12-24V Watts:40W(12V),80W(24V) Touch it for more than 3 seconds, it works as a dimmer.
(3) Motion sensor switch:
Input/Output: DC12-24V Watts:40W(12V),80W(24V) Working distance: 300cm
Activated by body movements. It will turn off if there are no movements detected in about 30 seconds.
And it will not turn off if there are ongoing movements.
(4) Proximity switch:
Input/Output: DC12-24V Watts:40W(12V),80W(24V) Working distance: 0-60mm
The switch will be in Off status if there is an object in front of it. And it will turn On if the object is removed.
It is suitable for cabinet/wardrobe and drawer lighting control. Also, you can use it to turn on the lamp when you open a room door and turn off the lamp when you close the door, especially when it comes to the basement or other scenarios.
Surface-mounting bracket/holder and screws come with the switch
Input/output terminal can be removed and connected directly in a wire-to-wire way if there is no this kind of terminal in the existing circuit.
There are special designs to enable you to connect it correctly after it is detached.
Detector size: D12mm x L27mm
Bracket/holder and screws come with the switch
Use Cases
Autonomous navigation, self-balancing robots, drone flight stabilization, obstacle avoidance, and IoT tracking applications.
Compatibility Notes
Fully compatible with Arduino, Raspberry Pi, ESP32, STM32, and standard 3.3V/5V microcontroller logic levels.
Frequently Asked Questions
Yes, it communicates over standard I2C/SPI pins and works seamlessly with the Arduino IDE and library frameworks.
It is designed to work safely on both 3.3V and 5V power rails, offering wide logic-level compatibility.
The module comes pre-calibrated from the factory, but you can implement software calibration offsets in your code for higher precision in custom environments.
Related Products
Other products in IMUs and Motion Sensors that you may find useful.
