Touch Motion Sensor Switch Hand Sweep Wave On-Off 12V-24V IR Movement Sensing for Closet Cabinet Light Wardrobe Door Drawer Lamp

Click/Tap below photo for 3/6 way splitter and 2 meter cable:

Click/Tap below photo for Double Sensor Door Switch:

Four Types of Switch for you to choose from

(1) Hand-waving sensor switch:

Input/Output: DC12-24V   Watts:40W(12V),80W(24V)   Working distance: 20-80mm

Activated by hands waving (actually, you can wave a book or other items). When you wave your hand at the sensor it will turn on automatically.

When you wave your hand again it will turn off. When you keep your hand still in front of it for more than 3 seconds, it works as a dimmer.

(2) Touch switch:

Input/Output: DC12-24V   Watts:40W(12V),80W(24V)  Touch it for more than 3 seconds, it works as a dimmer.

(3) Motion sensor switch:

Input/Output: DC12-24V   Watts:40W(12V),80W(24V)   Working distance: 300cm

Activated by body movements. It will turn off if there are no movements detected in about 30 seconds.

And it will not turn off if there are ongoing movements.

(4) Proximity switch:

Input/Output: DC12-24V   Watts:40W(12V),80W(24V)   Working distance: 0-60mm

The switch will be in Off status if there is an object in front of it. And it will turn On if the object is removed.

It is suitable for cabinet/wardrobe and drawer lighting control. Also, you can use it to turn on the lamp when you open a room door and turn off the lamp when you close the door, especially when it comes to the basement or other scenarios.

Surface-mounting bracket/holder and screws come with the switch

Input/output terminal can be removed and connected directly in a wire-to-wire way if there is no this kind of terminal in the existing circuit.

There are special designs to enable you to connect it correctly after it is detached.

Detector size: D12mm x L27mm

Bracket/holder and screws come with the switch