Guition ESP32-S3 8M Psram 4M Flash 4.3-inch IPS 480*272 LCD display module with Wifi and Bluetooth
Data download link:http://pan.jczn1688.com/s/zyojx8Hardware Feature of JC4827W543C/R_I4.3” LCD-TFT HMI Capacitive touch or Resistance touch display moduleSupports WiFi and BluetoothSupport lithium battery power supplyCapacitive touch or Resistance touch480 x 272 screen resolutionRGB 65K true-to-life coloursOnboard 240MHz LX6 MCU520K Byte RAM8 MB PSRAM4 MB Flash memoryJST1.25 4 Pins (+5V, TX, RX, GND) TTL serial interface
- Powerful, high-efficiency processing core for rapid script execution
- Onboard USB-to-UART bridge for clean code uploads and serial logging
- Full compatibility with Arduino IDE, VS Code, and MicroPython
- Rich array of GPIO, ADC, PWM, I2C, and SPI pins for broad expansion
- Built-in low-dropout (LDO) voltage regulator for stable board supply
- Compact, double-sided PCB layout ideal for tight project custom cases
- Integrated Wi-Fi and Bluetooth BLE transceivers for smart IoT control
Need help before you buy?
Call iBuyRobotics for product guidance, compatibility questions, bulk orders, or support.
(855) I-BUY-ROBO (855) 428-9762Data download link:
http://pan.jczn1688.com/s/zyojx8
Hardware Feature of JC4827W543C/R_I
4.3” LCD-TFT HMI Capacitive touch or Resistance touch display module
Supports WiFi and Bluetooth
Support lithium battery power supply
Capacitive touch or Resistance touch
480 x 272 screen resolution
RGB 65K true-to-life colours
Onboard 240MHz LX6 MCU
520K Byte RAM
8 MB PSRAM
4 MB Flash memory
JST1.25 4 Pins (+5V, TX, RX, GND) TTL serial interface
Use Cases
Microcontroller firmware writing, edge computing, wireless IoT remote control, sensor data logging, and central robot coordination.
Compatibility Notes
Compatible with Arduino IDE, VS Code (PlatformIO), Espressif IDF, MicroPython, and standard prototyping breadboards.
Frequently Asked Questions
It is fully compatible with standard platforms like the Arduino IDE, VS Code (PlatformIO), Espressif ESP-IDF, or MicroPython editors.
Yes, most chips in this class feature built-in Wi-Fi and Bluetooth dual-mode modules for wireless connectivity.
Yes, you can connect a regulated voltage source to the VIN and GND pins, or use the onboard micro-USB/USB-C power port.
Related Products
Other products in Microcontroller Boards that you may find useful.
