CFsunbird
DC 12V 30A High-Power Brushless Motor Speed Controller 3-phase Regulator PWM Brushless Motor Speed Controller Drive
Feature:With micro single-chip system, this speed control can achieve simple system programming, which can suit better high-speed high-power brushless motors.It has several functions:1.Safety Startup: To avoid any injury, the motor will not start up immediately if the potentiometer of speed controller is not at the lowest gear, which is necessary for high-speed high-power motor to protect user\'s safety.2.Temperature Protection: The speed control has aluminum heat sink, which allows it work
$9.99
In Stock
Secure checkout
Fast shipping
30-day returns
Need help before you buy?
Call iBuyRobotics for product guidance, compatibility questions, bulk orders, or support.
(855) I-BUY-ROBO (855) 428-9762Feature:
With micro single-chip system, this speed control can achieve simple system programming, which can suit better high-speed high-power brushless motors.
It has several functions:
1.Safety Startup: To avoid any injury, the motor will not start up immediately if the potentiometer of speed controller is not at the lowest gear, which is necessary for high-speed high-power motor to protect user\'s safety.
2.Temperature Protection: The speed control has aluminum heat sink, which allows it work at 30 A continuously. When temperature reaches 110 celsius degree, temperature detect system will send a protection signal and system will auto decrease 60% power output to protect speed control and motor. It will back to normal power after temperature is decreased. To protect the actuator module, please dissipate heat during long-time using.
3. The signal loss prevention: Auto shut down when there is no signal detected from PWM signal generator(potentiometer ).
4. Power Identification System: The speed control has power identification system, which is designed for high-speed high-power motors such as in model plane. It is not suitable for low-power brushless motors.
5, Programming Functions: With single-chip control system, some functions could be altered:
a, Startup: Flexible slow startup/direct startup
b, Braking: Reverse load quick braking/free braking
c, Adjustable Timing: Small/medium/large
d, Low Voltage Protection: Low/medium/high
e, Battery Types: Lithium /nickel chrome/NIMH/plumbic acid
6. Back to Factory Settings: Wrong operation can be cleared
7. Other Function(please ignore if only used for motor drive ) : The external PWM signal generator can send signal to control speed or to turn steering gear, therefore it can test steering gears less than 55 g.
Specification:
Rated voltage: DC 6-12.8V
Current rating: 32A (within 5s, max current can not exceed 40A)
Nominal power: 360W
Rated Power: 5V 0.5A
Temperature protection: 110°C
Speed range: 8%~98%
For motor poles: 2-18 pole
Start: flexible start/immediate start
Brake: reverse load /no brake
Speed signal: 8KHz/16KHz fixed frequency PWM
Related Products
Other products in Robots that you may find useful.
Robots
Kingbank DDR5 16GB 32GB RAM 6000MHz 6400MHz 6800MHz 7200MHz XMP PC Desktop Computer Memoria ram
$891.99
Robots
LILYGO® Ttgo Meshtastic LoRa32 ESP32 LoRa Development Board SX1276 SX1278 Module 433/868/915MHz 0.96 Inch Oled LoRa Low Power
$55.99
Robots
LED Motion Sensor 220V 110V Smart Switch Automatic PIR Infrared Detector 180 Degree Rotating Outdoor Auto ON OFF Light Switch
$11.99
Robots
RP2040-Zero RP2040 for Raspberry Pi Microcontroller Pico Development Board Module Dual-core Cortex M0+ Processor 2MB Flash
$9.99
Shop with confidence
