LED Radar Sensor Light Led Ceiling Lamp 220V Motion Sensor Lighting for Room Hallways Aisle Induction Ceiling Lights Garage

Please read the working principle of the following induction ceiling lights carefully when placing an order：

1. The radar light needs to be dim or at night. When someone passes by, the light can only work properly after it is sensed. The lights remain off during the day.
(After receiving the goods, please test at night)

2. The light will turn on when it senses a person, keep working for about 30 seconds and then turn off, wait for a few seconds and then sense the light again.

3.The sensitivity of radar induction will be higher than that of human body induction ceiling lights.The range that can be sensed is relatively large.Therefore, if it is installed in a relatively narrow space, it may be sensed when passing by outside the door.

Common Problems-Solutions：

1. After installing the lights, if the lights are not turned off for a long time after you leave.Please turn on the video recording function on your phone, then leave the room, close the door, and keep no one passing by outside the room.The recommended test time is at night.In this way, it is possible to test whether it is a problem with the quality of the lamp.

2.If the received product is damaged or cannot be lit normally after being powered on, please feel free to contact us. After we verify the situation, we will provide you with a new solution.

There are two styles of this link：

✔Radar sensor ceiling light：
Voltage: AC185-265V
20W：25.5*25.5*5cm，1036LM
30W: 30*30*5cm，1917LM

✔Human body induction ceiling light：
Voltage: AC180-265V, 800LM
12W: 22*22*3.5cm
18W: 30*30*3.5cm, 1200LM