Hand Sweep Switch 5A 12V-24V, Smart IR Motion Sensor Light for Wardrobe Cabinet, Touch ON/OFF & Dimming, for Closet LED Lamp
Hand sweep sensor Switch■Working voltage:12V-24V DC■Rated Current:5A■Rated Power:≤60W■Sensing distance:5-10cm■Function: Sweep Wave your hand to turn on the light,then wave your hand to turn off the light.Long press to continuously adjust the brightness6. Hole:10mmSingle-door Sensor Switch■Working voltage:12V-24V DC■Rated Current:5A■Rated Power:≤60W■Function: The door opening light is on, the door closing light is off■If need open hole:10mmTouch Sensor Switch■Working voltage:12V-24V DC■Rated Curr
- High-precision sensing output for advanced robotic control
- Dual-voltage logic compatibility supporting 3.3V and 5.0V inputs
- Integrates easily with standard I2C and SPI serial interfaces
- Ultra-compact form factor suitable for miniature space setups
- Factory-calibrated for immediate out-of-the-box prototyping
- Low power consumption ideal for battery-operated smart devices
- Robust electromagnetic interference (EMI) shield shielding
Need help before you buy?
Call iBuyRobotics for product guidance, compatibility questions, bulk orders, or support.
(855) I-BUY-ROBO (855) 428-9762Hand sweep sensor Switch
■Working voltage:12V-24V DC
■Rated Current:5A
■Rated Power:≤60W
■Sensing distance:5-10cm
■Function: Sweep Wave your hand to turn on the light,then wave your hand to turn off the light.Long press to continuously adjust the brightness
6. Hole:10mm
Single-door Sensor Switch
■Working voltage:12V-24V DC
■Rated Current:5A
■Rated Power:≤60W
■Function: The door opening light is on, the door closing light is off
■If need open hole:10mm
Touch Sensor Switch
■Working voltage:12V-24V DC
■Rated Current:5A
■Rated Power:≤60W
■Function: TTouch control on/off, Long press for stepless dimming.
■If need open hole:12mm
Dual-door Sensor Switch
■Working voltage:12V-24V DC
■Rated Current:5A
■Rated Power:≤60W
■Function: Turn on one door light and it will turn on, you need to turn off two door lights to turn off
■If need open hole:10mm
PIR Sensor Switch
■Working voltage:12V-24V DC
■Rated Current:5A
■sensing distance:1-3M
■Rated Power:≤60W
■Function: The light turns on when people come.and turns off 30 seconds after people leave(People are constantly active in the sensing area,while time keeps overlapping. When people are still and unresponsive, the sensor cannot sense them)for wardrobe cabinets, etc.
■If need open hole:12mm
Use Cases
Autonomous navigation, self-balancing robots, drone flight stabilization, obstacle avoidance, and IoT tracking applications.
Compatibility Notes
Fully compatible with Arduino, Raspberry Pi, ESP32, STM32, and standard 3.3V/5V microcontroller logic levels.
Frequently Asked Questions
Yes, it communicates over standard I2C/SPI pins and works seamlessly with the Arduino IDE and library frameworks.
It is designed to work safely on both 3.3V and 5V power rails, offering wide logic-level compatibility.
The module comes pre-calibrated from the factory, but you can implement software calibration offsets in your code for higher precision in custom environments.
Related Products
Other products in Sensors that you may find useful.
